Atomwear features
- It’s modular in design!
Each of module performs one or two functions,which then can be assembled together to create a variety of cool products. The possibilities are endless!
- It has a 24-pin uniform interface
All the modules have an uniform 24-pin interface as shown below.
Atomwear’s interface board has six 24-pin sockets, connected in
parallel, for your different modules. you can then place the modules in
any of the six positions in the direction of the arrows! If you think
the base board is too long, you can cut it shorter. Otherwise, if you
think one base board is not enough, we will provide free a connector
board which acts as a bridge to connect two base board to backers who
fund two or more atomwears.
In addition,the 24-pin module contains 1*SPI, 1*UART, 1*I2C, 1*SWD, 6*ADC/GPIO + 2*GPIO, so it is flexible to extend more modules. For conenvience, we call the board with six 24-pin sockets “base board”.
The remaining four sockets can be used to add any other functions. The only thing need to do is to design a new module with Atomwear’s uniform interface. We currently have a bunch of other designs available, such as GPS module, wireless charger module, bar code reader module, NFC module, etc.
If you have a good idea, feel free to contact and share with us!
In addition,the 24-pin module contains 1*SPI, 1*UART, 1*I2C, 1*SWD, 6*ADC/GPIO + 2*GPIO, so it is flexible to extend more modules. For conenvience, we call the board with six 24-pin sockets “base board”.
- It’s completely customizable!
The remaining four sockets can be used to add any other functions. The only thing need to do is to design a new module with Atomwear’s uniform interface. We currently have a bunch of other designs available, such as GPS module, wireless charger module, bar code reader module, NFC module, etc.
If you have a good idea, feel free to contact and share with us!
- It’s tiny!
Battery : 20mm*10mm*3.0mm with 40mAh.
MCU board: 10mm*21mm.
Other boards: 10mm*10mm.
We will provide samples for backers, and will open all our source code to them.
We will also provide the demo android app and API of Atomwear. This app allows for exchanging of data with BLE devices through a Bluetooth connection, whereas the typical BLE project will need you to develop the BLE firmware and phone app yourself.BLE device firmware is usually written in C language and assemble language, while the phone apps are almost written in java, Hence, you will derive a lot of benefit from the source code which we have released.
https://www.kickstarter.com/projects/343910040/atomwear
MCU board: 10mm*21mm.
Other boards: 10mm*10mm.
- It’s totally Open source!
We will provide samples for backers, and will open all our source code to them.
We will also provide the demo android app and API of Atomwear. This app allows for exchanging of data with BLE devices through a Bluetooth connection, whereas the typical BLE project will need you to develop the BLE firmware and phone app yourself.BLE device firmware is usually written in C language and assemble language, while the phone apps are almost written in java, Hence, you will derive a lot of benefit from the source code which we have released.
https://www.kickstarter.com/projects/343910040/atomwear
No comments:
Post a Comment